радиально-упорные шарикоподшипники

Отправить запрос

Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

25 mm x 52 mm x 20.6 mm NACHI 5205A-2NS радиально-упорные шарикоподшипники

310 475 kN
52 17.9 Kg

Toyana 71810 CTBP4 радиально-упорные шарикоподшипники

RHP 222 kN
107.95x190.5x31.75 LRJ4.1/4

30 mm x 62 mm x 16 mm NACHI 7206CDF радиально-упорные шарикоподшипники

6018LLB No
4547359004267 ABEC 1 | ISO P0

20 mm x 47 mm x 14 mm ISO 7204 C радиально-упорные шарикоподшипники

42 mm 22 Nm
64 mm UC212G2

95 mm x 170 mm x 32 mm FAG QJ219-N2-MPA радиально-упорные шарикоподшипники

0.3 mm 19.15 mm
13.5 mm 13.4

40 mm x 62 mm x 12 mm SNFA HB40 /S/NS 7CE3 радиально-упорные шарикоподшипники

5565R/5535 318 kN
43,764 116 mm

65 mm x 140 mm x 33 mm SKF 7313 BECBY радиально-упорные шарикоподшипники

65x110x28 CX
22,5 mm 110

80 mm x 125 mm x 22 mm FAG HSS7016-C-T-P4S радиально-упорные шарикоподшипники

0.063 Kg 291 kN
Roller Bearings WS.81117
1/12