линейные подшипники

Отправить запрос

Linear motion is the most basic of all motion. Linear ball bearings provide linear movement in one direction.A roller bearing, carries a load by placing rolling balls or rollers between two bearing rings called races. These bearings are comprised of an outer ring and several rows of balls retained by cages. Roller bearings are manufactured in two styles: ball slides and roller slides.Ball bearing slides are the most common type of linear slide. They use self-lubricated ball bearings housed in the base. This arrangement offers smooth precise movement along a single-axis linear design. Typically constructed from aluminum, hardened cold rolled steel or galvanized steel, ball bearing slides consist of two linear rows of ball bearings contained by four rods located on opposite sides of the base, which support the carriage for smooth linear movement. This low-friction linear movement can be powered by a drive mechanism, by hand, or inertia. Ball bearing slides have a lower load capacity compared to other linear slides, this is because the balls are less resistant to wear and abrasions.

Samick LMK35 линейные подшипники

0,065 Kg 21 mm
0,6 mm 17

INA KBO20-PP-AS линейные подшипники

M10x1 157.2 mm
116 mm YAR 210-2FW/VA201

Samick LMKM8UU линейные подшипники

SKF 0.0

NTN KH4060LL линейные подшипники

118000 N 620000 N / Dynamic l
64 mm 216 mm

KOYO SDM60AJ линейные подшипники

0,032 Kg 24 mm
16 mm NK24/16

50 mm x 80 mm x 148 mm Samick LM50L линейные подшипники

33 mm 35
GB12862 SNR

NBS SCW 12-UU линейные подшипники

22,91 kN Timken
1,02 mm 34,925

INA KGSNS20-PP-AS линейные подшипники

240,000 mm 110,000 mm
NTN 110x240x160

60 mm x 90 mm x 170 mm Samick LM60LUU линейные подшипники

2 mm 7.874 Inch | 200 Mil
120 mm 62

NBS KBHL 12-PP линейные подшипники

NTN 17
14 mm 7,05 kN