
- компания по механическому подшипнику SKF без олова.
- игольчатые подшипники колесные подшипники конические роликовые подшипники
- Адресзвук.Северная Америка 009, раздавлено.57100, Гвадалупе, Нуэво - Леон
- Рабочий телефон(рабочее время)54-11-4-472-1272
- Рабочий телефон(Нерабочее время)54-11-4-472-1272
конические роликовые подшипники
Отправить запросTapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The rollers are stabilized and restrained by a flange on the inner ring, against which their large end slides, which stops the rollers from popping out due to the "pumpkin seed effect" of their conical shape.
The larger the half angles of these cones the larger the axial force that the bearing can sustain.
45,618 mm x 82,931 mm x 25,4 mm NTN 4T-25590/25520 конические роликовые подшипники
4 250 kN | 360 mm |
200 mm | 180 mm |
100 mm x 215 mm x 51 mm FAG 31320-X конические роликовые подшипники
522,288 | 0,86 |
418 mm | 85,725 |
406,4 mm x 762 mm x 161,925 mm ISO H969249/10 конические роликовые подшипники
508 | 53,5 Kg |
330,2 | 1560 kN |
40 mm x 85 mm x 21,692 mm NTN 4T-350A/354A конические роликовые подшипники
12400 r/min | 15,4 kN |
ZEN | 0,1 Kg |
Timken 26131/26284D+X1S-26131 конические роликовые подшипники
SKF | 5000 |
12 mm | 1500 Kg |
273,05 mm x 393,7 mm x 69,85 mm NTN T-EE275108/275155 конические роликовые подшипники
60000 1/min / Limiti | 0,05 kg / Weight |
38000 1/min / Limiti | 0,3 mm |
100 mm x 140 mm x 25 mm NSK HR32920J конические роликовые подшипники
1,92 | 2700 kN |
220 mm | 0,34 |
92,075 mm x 168,275 mm x 41,275 mm NTN 4T-681A/672 конические роликовые подшипники
21,5 mm | 1,6 Kg |
85 mm | M6x1 |